Dell
Refill Instructions
Black cartridge
Instructions
1. Put the cartridge on some paper towels in an area where you can tolerate a spill.
2. Peal off the top label.
3. Fill the syringe with
15ml. of black ink.
4. Very S-L-O-W-L-Y inject ink into the hole closest to the copper strip. Any hole will actually do, they all go to the same sponge, but the first hole is closest to the printhead.
5. When finished, replace the top label or leave it off (it will make no difference in the printing).
6. Replace the cartridge and run 1 - 3 cleaning cycles as
per printer instructions.
Or print the following pages:
www.my10s.com/black.htm
for Black
For best results, leave cartridge in printer for 8 hours after refilling so the ink can saturate the entire sponge.
Note: On some of the newer Dell cartridges the filling holes are very small and need to be drilled out larger so the syringe needle can enter the cartridges.
A Refill Kit should include Ink plus
the following:
One 30cc Syringe